KOM 1250 NOBLE SERIES Uf = 1,1 W/m²°K,Uw = 0,97 W/m²°K,Ug = 0,6 W/m²°K

Designed in compliance with German RAL standards. For low energy houses and to use for restorations in old building to achieve energy cost. To use for high buildings and business centers. -3 mm wall - thickness; A Class. -Extra profile depth: 91 mm – Frame and 91 mm - Window and Door sashs profiles. -Smart profile geometry, aesthetics, functionality, and extra chamber: 7 chambers -Triple sealing system: Increased energy saving and high noise, wind and rain impact resistance with triple sealing system. Winter cold, summer heat, air dust and moisture, traffic noise stay outside. Very high energy saving, warm in winter, cool in summer optimum life spaces. -Very low profile thermal conductivity coefficient. Uf = 1,1 W/m²°K, with IFT Rosenheim test report. -Very low window thermal conductivity coefficient. Uw = 0,97 W/m²°K, with IFT Rosenheim test report (with 44mm triple glazing Ug = 0,6 W/m²°K) Note: IFT test results are obtained by computer calculation. Prevents heat loss in large windows regarding glass heat losses. -Extra peace. Improved sound isolation by different acoustic glass applications: 44 dB -Suitable for 24 mm – 32 mm – 44 mm glazing and panel. -High strength provided by reinforcement profiles with high moment of inertia. -PVC-U used in profile production complies with DIN 7748 standard. -Durable against hot and cold climate conditions. -Durable against thermal shocks between -60 / +100 0C . -When exposed to heat at 150 ° C for half an hour there will be no defects such as cracking, flaking, scuffing or swelling on the profile surface. -In cold shock test, it is resistant to crushing which will be caused by sudden impact of 1 kg mass left from 1.5 meter height. -The short-term welding factor is 1.0. It has welding values well above the standards. -Thermal stability is 40 minutes according to DIN 53381. -The double notch impact resistance is 67 kJ / m2 according to DIN EN ISO 179/1 FC. -Glass lathes are TPV sealed. -It looks like wooden with rich lamina variety. -It has drained wings. -Extra glossy, homogeneous, scratch-free, smooth looking, premium finished profiles that will not saturate, which are produced by moulds produced with Ultra Fine Tuning technology. -The glass lathes are designed specially to prevent from dust, and are applied as 45° cuts to the joineries. Corner edges match exactly and no gap is left at the joints.